Ethernet Interface Adapter User’s Guide

6 Ethernet Interface Adapter User’s Guide - SETUP MENU - . Edit Host IP addr 0.0.0.0 2. Edit Local IP addr 0.0.0.0 3. Edit Su

Configuring the Ethernet Interface 7 - SETUP MENU - 1. Edit Host IP addr 175.55.172.90 2. Edit Local IP addr 0.0.0.0 3.

8 Ethernet Interface Adapter User’s Guide Edit Subnet Mask The subnet mask is a specific sequence of numbers that determines which part of an IP a

Connect to Host 9 Comm Protocol The adapter’s communication protocol could be set to None, Xon/Xoff, DTR/DSR, or Both. This setting should ma

10 Ethernet Interface Adapter User’s Guide host. This can be done by selecting option number 2 from the Main Menu. The terminal responds with a pr

Hardware Information 11 While waiting for the host to return, the terminal displays the message Trying to ping followed by the IP address. I

12 Ethernet Interface Adapter User’s Guide ◊ Part Number is the 10-diogit number of the Ethernet interface. ◊ Diagnostics Results reports the st

Technical Support Questions about this product should be directed to the Technical Support Department of the distributor from which you obtained you

100 Marcus Boulevard *598-00112716*

WARNING THIS PRODUCT CONTAINS ELECTRICAL POWER AND OTHER SENSITIVE COMPONENTS WITHIN ITS CASE, AND IS NOT DESIGNED FOR CONSUMER ACCESS OR REPLACEME

Error! No text of specified style in document.Error! No text of specified style in document. iii All rights reserved. Printed in USA

Contents Introducing the Ethernet Interface...1 Configuring The Terminal...

1 chapter 1 Ethernet Interface Adapter User’s Guide The Ethernet Terminal consists of a standard Boundless Technologies text terminal with an adapt

2 Ethernet Interface Adapter User’s Guide The adapter provides 802.3 Ethernet connectivity, TCP/IP host connectivity, and Telnet application conne

Startup Sequence 3 Term during the setup navigation. Once the adapter is setup and running, you can change the terminal’s and host’s emulatio

4 Ethernet Interface Adapter User’s Guide Check 05h NVRAM and RAM problem Check 0Dh MAC, NVRAM and RAM problem Check 06h NVRAM and ROM problem C

Configuring the Ethernet Interface 5 ◊ Selection 2 (Connect to Host) allows you initiate or terminate the Telnet connection to the host. ◊